5 advantages of infrared lamps used in powder curing

5 advantages of infrared lamps used in powder curing

With the improvement of environmental protection awareness in the industry, traditional paint spraying has been gradually replaced by spraying technology. In coating product lines - such as furniture automatic powder spraying line, hardware spraying production line, aluminum template powder spraying line, and MDF powder spraying line - infrared heating and curing has become the mainstream technology of the drying process, and is increasingly used by manufacturers.

In the following article, Anhui Quickly Industrial Heating Technology Co., Ltd shares the infrared drying application of powder coatings.

infrared lamp wave type selection: Powder curing needs to be heated from the inside to the out, and the heating speed is high. Therefore, a fast medium wave heating lamp is recommended.

Five advantages of using infrared lamps in powder curing:

1. The infrared lamp is a heat radiation light source, which has strong penetrating power and can heat both inside and outside.

2. Infrared Tunnel Furnace is heated from the inside, The time required from power-on to reaching the desired temperature is 2 to 4 minutes, so the work efficiency can be improved by more than 2~3 times.

3. Powder coating drying line is short, so using infrared heating is high-efficiency, energy-saving, and consumption reduced.

4. The infrared heating equipment can be controlled in sections, the temperature control is easy and safe, and the temperature rises quickly

5. Infrared Tunnel Furnace does not need to warm up, its' heat continuity is small, so it can More cost savings for businesses. 

It is precise because of the above advantages that infrared drying equipment has been widely used. At the same time, infrared heating has become the best solution because of its technology, environmental protection, and economy. Anhui Quickly is your infrared heating expert, with 15 years of rich experience, to provide you with quality service.